BIOS Update

Modified on Fri, 20 Sep, 2024 at 9:58 AM

Standard BIOS Update Procedure under UEFI Shell

================================================

1. Save this BIOS update package to your computer.

2. Extract the files from the UEFI folder of the BIOS package to a USB stick. (Note: The USB stick doesn't have to be

bootable, but has to be formatted with FAT/FAT32 file system.)

3. Plug the USB stick into USB port, boot to the Build-In UEFI Shell, selectable item in boot menu by pressing F11 key

during boot up, and type FLASH.nsh BIOSname#.### to start the BIOS update: (Flash.nsh SUPER.ROM (change .bin file to SUPER.ROM))

Shell> fs0:

fs0:\> dir

fs0:\> cd <your directory>

fs0:\your directory>flash.nsh <BIOS file>

4. The FLASH.NSH script will update BIOS automatically.

A new file, STARTUP.NSH, will be created and the system will go into reboot in 10 seconds.

At the reboot, hit "F11" key to invoke the boot menu & boot into the build-in UEFI Shell again.

The BIOS update will be resumed, automatically.

5. Do not interrupt the process until the BIOS update is complete.

6. After the message indicating BIOS update has completed, do the A/C power cycle.

7. Go to the BIOS configuration, and restore the BIOS setting.